Precision in every drop. Process-led dispensing automation.
1K · 2K · Potting · Vision · Inline
APPLICATION

Automotive & EV Dispensing

Dispensing for ECU, BMS, sensors, charging modules, batteries and power electronics.

COMMON DISPENSING PROCESSES

Typical process combinations

The dominant process changes by product. These six patterns cover the most common engineering needs in this sector.

ECU / BMS
Housing sealing

ECU / BMS

Create repeatable closed-loop seals with controlled bead start, stop and overlap.

Power modules
Thermal gap filling

Power modules

Handle high-volume filled materials while controlling thickness, coverage and cycle time.

Structural assemblies
2K bonding

Structural assemblies

Meter, mix and dispense 2K epoxy, PU or silicone at a stable ratio.

Sensors / charging modules
Potting

Sensors / charging modules

Controlled fill for moisture, vibration and electrical protection.

Part and feature check
Vision poka-yoke

Part and feature check

Verify orientation and compensate position before dispensing.

PLC / MES
Traceable inline cell

PLC / MES

Integrate barcode, recipe, status and production data for mass production.

ENGINEERING INPUT

Automotive and EV programs prioritize reliability, takt time and traceability

Define material specification, sealing or IP targets, thermal bondline, mix ratio, cycle time and traceability interfaces. High-volume or highly filled materials should be tested for feed capacity and wear.